manualshive.com logo in svg

Miele KWT 6722 iG S, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KWT 6722 iG S Скачать руководство пользователя страница 51

Active AirClean filters

51

To confirm the filters have been
changed

Touch the settings sensor.

All symbols available for selection will
appear in the display and the 

 symbol

flashes.

Touch the sensors for setting the
temperature (

 or 

) repeatedly until

the 

 symbol flashes.

Touch the OK sensor to confirm your
selection.

The 

 will flash in the display (means:

Active AirClean filter is fitted in the ap-
pliance), the 

 symbol lights up.

Touch the symbols for setting the
temperature (

 or 

) repeatedly, until

the 

 symbol is displayed (means: the

counter has been reset).

Touch the OK sensor to confirm your
selection.

The selected setting is applied, the

 symbol flashes.

Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits set-
tings mode automatically after ap-
proximately one minute.

The 

 in the display goes out.

Содержание KWT 6722 iG S





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды