manualshive.com logo in svg

Miele KWT 6722 iG S, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KWT 6722 iG S Скачать руководство пользователя страница 19

Accessories

19

Accessories supplied

Chalk

Use the chalk to annotate the magnetic
strips on the wooden shelves to identify
your wines quickly and easily.

Optional accessories

A range of useful Miele accessories and
care products are available for your
wine conditioning unit.

Multi-purpose microfibre cloth

The microfibre cloth is suitable for re-
moving fingerprints and light soiling
from surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.

MicroCloth Kit

The MicroCloth Kit contains a universal
cloth, a glass cloth and a polishing
cloth. 
These cloths are extremely rip-proof
and hard-wearing. Thanks to very fine
microfibres these cloths achieve excel-
lent cleaning results.

Active AirClean filter

The Active AirClean filter ensures op-
timum air quality in the wine condition-
ing unit by filtering the incoming air.

WiFi stick (Miele@home)

The WiFi stick enables your wine condi-
tioning unit to communicate, so that
you can access appliance data at any
time.

Accessories are available to order via
the Miele Webshop, from Miele dir-
ectly (see back cover for contact de-
tails) or from your Miele dealer.

Содержание KWT 6722 iG S





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды