manualshive.com logo in svg

Miele KWT 6722 iG S, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KWT 6722 iG S Скачать руководство пользователя страница 21

Switching on and off

21

The interior lighting will come on when
the door is opened.

Selecting settings

A different setting can be set for each
wine conditioning zone.

Touch the sensor for the wine condi-
tioning zone you want to adjust the
settings for.

The sensor that has been selected is
highlighted in yellow. Now you can

– Set the temperature, and

– Switch on the DynaCool function.

Tip: 

Please refer to the relevant sec-

tions for more information.

If you then select a different wine con-
ditioning zone, the settings for the pre-
viously selected zone will remain un-
changed.

Switching off

Touch the On/Off sensor.
If this does not work, the safety lock

 is still activated.

The sensors for the two wine condition-
ing zones will then go out. 
The temperature display will go out and
the mains connection symbol 

 

 will

appear.

The interior lighting will go out and the
cooling process will be switched off.

Содержание KWT 6722 iG S





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды