Miele KWT 6422 iG Скачать руководство пользователя

Страница: 67 / 84

Installation

I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-



Check that the wine conditioning unit
is standing securely in the niche and
that the door closes properly.

Installing the wine conditioning
unit

Before installing the wine condition-
ing unit



Take any accessories out of the appli-
ance.



Remove the cable clip from the back
of the appliance (depending on
model).



Risk of damage and injury from

wine conditioning unit tipping over.
There is an increased risk of injury
and damage if the wine conditioning
unit is installed by a single person.
Two people are required for installing
the wine conditioning unit.



Install the wine conditioning unit in a
stable, solid housing unit, positioned
on an even and level floor.



The building-in niche must be hori-
zontally and vertically aligned.



The required ventilation gaps must be
provided (see “Installation” – “Ventila-
tion” and “Building-in dimensions”).

The following parts are supplied with
the wine conditioning unit:

All installation parts are number coded.
This coding is also used in the installa-
tion instructions.

– Required for installing the wine con-

ditioning unit in its housing unit:

Содержание KWT 6422 iG





















































































Результаты поиска

Содержание KWT 6422 iG

Отзывы:

Похожие инструкции для KWT 6422 iG

Бренды по названию

Популярные бренды

Miele KWT 6422 iG, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT 6422 iG

Отзывы:

Похожие инструкции для KWT 6422 iG

Бренды по названию

Популярные бренды