background image

Contents

2

Warning and Safety instructions

..........................................................................  4

Caring for the environment

................................................................................  12

How to save energy

.............................................................................................  13

Guide to the appliance

........................................................................................  14

Control panel .........................................................................................................  14
Symbols.................................................................................................................  15
Using the door-opening mechanism correctly ......................................................  17

Accessories

.........................................................................................................  18

Accessories supplied ............................................................................................  18
Optional accessories.............................................................................................  18

Switching on and off

...........................................................................................  19

Before using for the first time ................................................................................  19
Operating the wine conditioning unit ....................................................................  19

Switching the wine conditioning unit on ..........................................................  19
Switching off.....................................................................................................  21

Switching off for longer periods of time ................................................................  21

Selecting further settings

...................................................................................  22

Safety lock 

........................................................................................................  22

Audible tones 

...................................................................................................  23

Display brightness 

............................................................................................  24

The optimum temperature and air quality

.........................................................  25

The optimum temperature.....................................................................................  25

Setting the temperature....................................................................................  26
Temperature range ...........................................................................................  27
Temperature display .........................................................................................  27

Air quality and humidity.........................................................................................  28

Using  DynaCool 

 (constant humidity) ..........................................................  28

Air filtration with the Active AirClean filter ........................................................  29

Temperature and door alarm

..............................................................................  30

Feature lighting

....................................................................................................  32

Switching the feature lighting on and off...............................................................  32

Setting the brightness of the feature lighting ...................................................  32
Lighting duration of the feature lighting ...........................................................  33

Содержание KWT 6422 iG





















































































Отзывы: