Miele KS 37472 iD Скачать руководство пользователя

Страница: 53 / 96

Frequently Asked Questions

Problem

Possible cause and solution

An LED indicator light is
flashing at the back of
the refrigerator at the
bottom near the com-
pressor (depending on
model).
The electronic unit for
the compressor is
equipped with an oper-
ation and fault diagno-
sis LED indicator light.

The indicator light flashes several times every 5 sec-
onds.
A fault has occurred.



Contact the Technical Service department.

The indicator light flashes regularly every 15 sec-
onds.
Not a fault. This flashing is normal.

The door seal is dam-
aged and needs to be
replaced.

No tools are required to change the door seal.



Contact Miele Service.

Ice or condensation has
built up inside the appli-
ance.

The door seal has come out of its groove.



Check that the door seal is correctly positioned in
the groove.

The door seal is damaged.



Check whether the door seal is damaged.

Содержание KS 37472 iD

































































































Результаты поиска

Содержание KS 37472 iD

Отзывы:

Похожие инструкции для KS 37472 iD

Бренды по названию

Популярные бренды

Miele KS 37472 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 37472 iD

Отзывы:

Похожие инструкции для KS 37472 iD

Бренды по названию

Популярные бренды