Selecting additional settings
34
Carbon filter replacement indi-
cator
This appliance is not supplied with
carbon filters with a KKF-FF holder
(Active AirClean). The holder is avail-
able as an optional accessory (see
“Accessories – Optional accessories”).
The carbon filter replacement indicator
must be activated once the filters have
been installed.
You will be reminded to replace the fil-
ters after approx. 6 months (see “Clean-
ing and maintenance - Replacing car-
bon filters”). The
symbol is illumi-
nated in the display.
After replacing the filter(s), the counter
must be reset. The indicator will then go
out.
Activating the carbon filter replace-
ment indicator or resetting the
counter
Touch the settings sensor button.
All symbols available for selection will
appear on the display and the
sym-
bol will flash.
Touch the sensor buttons for setting
the temperature (
or
) repeatedly
until the
symbol flashes on the
display.
Touch the OK sensor button to con-
firm the selection.
The most recently selected setting
flashes and the
symbol lights up in
the display.
Touch
or
to make your selection
: Carbon filter replacement indicator
deactivated
1
: Carbon filter replacement indicator
activated
2
: Counter reset.
Touch the OK sensor button to con-
firm the selection.
The selected setting is applied; the
symbol flashes.
Touch the settings sensor button to
exit Settings mode.
If you do not do this, the appliance
electronics will exit Settings mode
automatically after approximately one
minute.
