Miele KM 6629-1 Скачать руководство пользователя страница 59

Страница: 59 / 88

Problem solving guide

Problem

Cause and remedy

The hob has switched
off automatically. When
the element is switched
back on,



appears

above the On/Off
sensor control



One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.



Clean off any dirt and/or remove the object (see
“Safety features” – “Safety switch-off”).

After the hob has been
switched on,



appears

briefly in the timer dis-
play. The cooking zones
do not heat up.

The hob is in demonstration mode.



Touch the 0 sensor control on any of the numerical
displays.



Then touch the



and



sensor controls at the

same time until



flashes alternately with



the timer display.

A cooking zone
switches off automatic-
ally.

It has been operated for too long.



You can use the cooking zone again by switching
it back on (see “Safety switch-off”).

A cooking zone or the
whole hob switches off
automatically.

The overheating protection mechanism has been ac-
tivated.



See “Safety features”.

The Booster has deac-
tivated early automatic-
ally.

The overheating protection mechanism has been ac-
tivated.



See “Safety features”.

The cooking zone is not
working in the usual
way on the power set-
ting selected.

The overheating protection mechanism has been ac-
tivated.



See “Safety features”.

Power level 9 is auto-
matically reduced if you
select power level 9 on
two linked cooking
zones at the same time.

Operating both zones at power level 9 would exceed
the permitted maximum power for the two zones.



Use a different cooking zone.

The food in the pan
does not heat up when
the Auto heat-up func-
tion is switched on.

A large amount of food is being heated up.



Start cooking at the highest power level and then
turn down to a lower one manually later on.

The pan is not conducting heat properly.



Use a different pot or pan which conducts heat
properly.

Содержание KM 6629-1

























































































Результаты поиска

Содержание KM 6629-1

Отзывы:

Похожие инструкции для KM 6629-1

Бренды по названию

Популярные бренды

Miele KM 6629-1, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KM 6629-1

Отзывы:

Похожие инструкции для KM 6629-1

Бренды по названию

Популярные бренды