Miele KM 6324-1 Скачать руководство пользователя страница 39

Страница: 39 / 64

Safety features

Safety lock / System lock

The system lock and safety lock are
deactivated if there is an interruption
to the power supply.

Your cooktop is equipped with a system
lock and a safety lock to prevent the
cooktop and the cooking zones being
switched on or any settings being
altered.

The

system lock

is set when the

cooktop is switched off. When the
system lock is activated, the cooktop
cannot be switched on and the timer
cannot be used.

The

safety lock

is set when the

cooktop is switched on. When the
safety lock is activated:

– The power settings for the cooking

zones and the timer settings cannot
be changed.

– The cooking zones, entire cooktop

and the timer can be switched off,
but once switched off cannot be
switched on again.

If an unavailable sensor is touched
whilst the system lock or safety lock is
activated,



will appear in the timer

display for a few seconds and a tone
will sound.

Activating



Touch the



and



sensors until



appears in the timer display and a
tone sounds.



will go out after a short while..

Deactivating



Touch and hold the



and



sensors

at the same time until



disappears

from the timer display.

Содержание KM 6324-1

































































Результаты поиска

Содержание KM 6324-1

Отзывы:

Бренды по названию

Популярные бренды

Miele KM 6324-1, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KM 6324-1

Отзывы:

Бренды по названию

Популярные бренды