Miele KM 6324-1 Скачать руководство пользователя страница 28

Страница: 28 / 64

Operation



Risk of fire due to overheated

food.
Unattended food can overheat and
ignite.
Do not leave the cooktop unattended
whilst it is being used.

Please note that the heating-up time
on induction cooktops is very much
shorter than on conventional
cooktops.

Switching on



Touch the



sensor.



appears in each of the cooking zone

displays and



appears in the timer

display. If no further entry is made, the
cooktop will switch itself off after a few
seconds for safety reasons.

Selecting/Changing the power
setting



Briefly touch the sensor for the
required cooking zone.



will flash alternately with the selected

power setting in the cooking zone
display.



Touch the appropriate number sensor
for the power setting you want.

The power setting selected flashes in
the display for a few seconds to start
with and then lights up constantly.

Switching off



To switch a cooking zone off, touch
the sensor for the required cooking
zone twice.



To switch off the cooktop and all the
cooking zones, touch the



sensor.

Содержание KM 6324-1

































































Результаты поиска

Содержание KM 6324-1

Отзывы:

Бренды по названию

Популярные бренды

Miele KM 6324-1, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KM 6324-1

Отзывы:

Бренды по названию

Популярные бренды