Miele KM 6324-1 Скачать руководство пользователя страница 35

Страница: 35 / 64

Timer

The cooktop has to be switched on if
you wish to use the timer.
You can set a time up to a maximum
of 99 minutes.

The timer can be used for the following
2 functions:

– For setting the minute minder

– For automatically switching a cooking

zone off

Minute minder

Setting the minute minder

Example: You want to set a time of 15
minutes.



Make sure the cooktop is switched
on.



Touch the timer display



The right-hand



and the indicator light

for the minute minder will start to flash.

First the tens digit is set, then the units
digit.



Touch the number sensor which
corresponds to the tens position (1 in
this case).

The timer display will change and



will

start flashing on the right-hand side.



Touch the number sensor which
corresponds to the units position (5 in
this case).

The timer display will change. The



moves to the left and



appears on the

right.

The minute minder will begin to count
down.

Changing the minute minder



Touch the timer display.



Set a new minute minder time, as
described above.

Deleting the minute minder



Touch the time display until



appears.

Содержание KM 6324-1

































































Результаты поиска

Содержание KM 6324-1

Отзывы:

Бренды по названию

Популярные бренды

Miele KM 6324-1, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KM 6324-1

Отзывы:

Бренды по названию

Популярные бренды