Protective shelf
After installing the hob, you need to
make sure that the underside of the
appliance cannot be accessed or
touched.
A panel and a protective shelf must be
fitted if:
– there is no oven underneath the
appliance
– the appliance is wider than the oven
– the appliance and the oven are offset
from one another.
A minimum distance of 75 mm is
required between the upper surface of
the worktop and the protective shelf.
A gap of 10 mm must be maintained
between the shelf and the rear wall.
Installation
37
Содержание KM 520
Страница 33: ...KM 523 aSpring clamps bCasing depth cBuilding in depth for mains connection box dFront Installation 33 ...
Страница 41: ...Wiring diagram N B This appliance is supplied single phase only in the U K AUS NZ Installation 41 ...
Страница 43: ...43 ...
Страница 44: ...Alteration rights reserved 0711 M Nr 06 464 850 06 ...