Fixing the spring clamps
The exact positions of the spring
clamps are shown in the building-in
dimensions for the particular hob.
Worktops made of wood
^
Position the spring clamps (supplied)
a
in the positions shown (see
"Building-in dimensions") by placing
them on the upper edge of the
cut-out as illustrated, and secure with
the 3.5 x 25 mm screws supplied.
Granite and marble worktops
^
Position the spring clamps
a
, and fix
in place using double-sided tape
f
.
^
Apply silicone
g
to the side edges
and lower edge of the spring clamps.
The screws are not required for
granite or marble worktops.
Installation
35
Содержание KM 520
Страница 33: ...KM 523 aSpring clamps bCasing depth cBuilding in depth for mains connection box dFront Installation 33 ...
Страница 41: ...Wiring diagram N B This appliance is supplied single phase only in the U K AUS NZ Installation 41 ...
Страница 43: ...43 ...
Страница 44: ...Alteration rights reserved 0711 M Nr 06 464 850 06 ...