^
Slide the side section of the handle
d
into the guides on the mounting
plate until it clicks into place.
It is important to check that the side
section of the handle
d
does not
come into contact with the door seal
when opening the door, as this
would damage the door seal
permanently.
If they do come into contact, realign
mounting plate
c
with grub screws
a
until the mounting plate and the side
section of the handle
d
are at the
correct angle, and the side section
does not touch the seal when the door
is opened.
StayFresh zone compartments
^
Pull the compartment right out by
taking hold of it at the back and lifting
it up to remove it.
^
Pull the compartment lid forwards
a
.
^
Push the compartment lid in towards
the side that the appliance is going to
be opened from once the hinges
have been changed over
b
, and fit it
back on the runners.
^
Push the lid in until it engages
c
.
^
To put the compartment back in, pull
the runners
a
right out and place the
compartment on top of the runners
close up against the door opening
side.
The front of the runners must
be right up against the front of the
compartment
b
.
The compartment
will click into position. You can now
push the compartment back in
c
.
Make sure that the compartment lid
covers the compartment correctly.
Changing the door hinging
48
Содержание KFN 8667 S-1
Страница 44: ...Aligning the appliance To align the appliance adjust the feet using the spanner supplied Installation 44 ...
Страница 50: ...50 ...
Страница 51: ...51 ...
Страница 52: ...Alteration rights reserved 1905 KFN 8667 S 1 M Nr 06 515 750 01 en GB ...