Miele KFN 8667 S-1, Инструкции по эксплуатации и монтажу

Страница: 46 / 52

^
Open the upper door, and pull it
downwards and off. Take care not to
lose washer
a
.
^
Using a screwdriver remove covers
b
.
^
Unscrew upper hinge pin
c
using
the spanner supplied, and refit on the
opposite side.
^
Put covers
b
back on again from
behind, and then push them firmly
into place.
^
Exchange cover
h
in the middle of
the appliance with hinge bracket
e
.
To do this:
Undo screws
i
, pull cover
h
and
hinge bracket
e
off to the side, turn
around, and refit and screw into
position on the opposite side.
^
Pull bearing bush
d
downwards out
of hinge bracket
e
and refit it from
above into the hinge bracket.
^
Remove spacer
g
with a screwdriver
and refit it on the opposite side.
^
Remove plugs
j
from the door
bearing bushes in the doors and refit
on the opposite side.
^
Hang the upper door in hinge pin
c
(remember to use washer
a
), then
close the door.
^
Push middle hinge pin
f
from below
through hinge bracket
e
into the
upper appliance door.
^
Check that the upper door is
correctly aligned. If necessary align it
using the long slots in hinge bracket
e
.
^
Hang the lower door in hinge bracket
e
then close the appliance door.
Changing the door hinging
46