Miele KFN 37692 iDE Скачать руководство пользователя страница 88

Страница: 88 / 116

Installation

This appliance must be built in, oth‐

erwise it could tip up.

Location

This appliance should not be installed

where it is exposed to direct sunlight or

directly adjacent to a heat-producing

appliance such as an oven or a radiator.

The higher the ambient temperature of

the room, the more energy the appli‐

ance requires to operate. The appliance

should be installed in a dry, well ventila‐

ted room.
When installing the appliance, please

note:

– The socket must be easily accessible

in an emergency, not concealed be‐

hind the appliance.

– The plug and cable must not touch

the rear of the appliance as they

could be damaged by vibrations from

the appliance.

– Do not plug in other appliances be‐

hind this appliance.

Important.

In environments with

high humidity

condensation can build

up on external appliance panels. This

can lead to corrosion of the panels.
For prevention, it is advisable to install

the appliance with sufficient ventila‐

tion in a dry and/or an air-conditioned

room. Please ensure that the appli‐

ance doors close properly, the ventila‐

tion gaps are not covered over and

the appliance is installed in accord‐

ance with these installation instruc‐

tions.

Содержание KFN 37692 iDE





















































































































Результаты поиска

Содержание KFN 37692 iDE

Отзывы:

Бренды по названию

Популярные бренды

Miele KFN 37692 iDE, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 37692 iDE

Отзывы:

Бренды по названию

Популярные бренды