Miele KFN 37692 iDE Скачать руководство пользователя страница 59

Страница: 59 / 116

Cleaning and care



Carefully remove, the ice cube draw‐

er, which will be full of water. Empty

and clean it.

The ice cube tray

cannot be removed

and must be cleaned in situ.



Dry the ice cube tray



with a soft

cloth.

When the ice cube maker is switched

back on again, the ice cube tray will

rotate back into the original position.

Cleaning the ice cube tray

Clean the ice cube tray,

– before switching off the ice cube

maker for a long time

– regularly, to remove ice and water

residues.

If you have previously selected the

setting "Rinse the ice cube maker"

(see "Rinsing the ice cube maker"),

the ice cube tray will already be in the

cleaning position.

The ice cube tray



cannot be re‐

moved

and must be cleaned in situ. To

clean the tray you need to move it into

the cleaning position.

Selecting the cleaning position

The setting can only be selected if

the ice cube maker is switched on.



Empty the ice cube drawer.



Touch the settings sensor.

All symbols available for selection will

appear in the display and the



symbol

flashes.

Содержание KFN 37692 iDE





















































































































Результаты поиска

Содержание KFN 37692 iDE

Отзывы:

Бренды по названию

Популярные бренды

Miele KFN 37692 iDE, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 37692 iDE

Отзывы:

Бренды по названию

Популярные бренды