Miele KFN 37692 iDE Скачать руководство пользователя страница 24

Страница: 24 / 116

The correct temperature

It is very important to set the correct

temperature for storing food in the ap‐

pliance. Micro-organisms will cause

food which is not stored at the correct

temperature to deteriorate rapidly. Tem‐

perature influences the growth rate of

these micro-organisms. Reducing the

temperature reduces their growth rate.
The temperature in the appliance will

rise:

– the more often the door is opened

and the longer it is kept open,

– the more food that is stored in it,
– the warmer the food is which is being

put into it,

– the higher the ambient temperature

surrounding the appliance. The appli‐

ance is designed for use within spe‐

cific ambient temperatures (climate

range). Do not use in ambient tem‐

peratures for which it is not de‐

signed.

. . . in the refrigerator section

and in the PerfectFresh Pro

zone

We recommend a temperature of

4 °C

in the refrigerator section.
In the PerfectFresh Pro zone the tem‐

perature is controlled automatically and

is in the range

0 to 3 °C

Automatic temperature distribution

(Dynamic cooling)

The Dynamic cooling fan switches on

automatically when the cooling system

for the refrigerator switches on. It dis‐

tributes the temperature in the appli‐

ance to all areas more evenly so that all

the food will be chilled to about the

same degree.

. . . in the freezer section

To freeze fresh food and to store frozen

food for a long time, a temperature of

-18 °C

is required. At this temperature

the growth of micro-organisms is gen‐

erally halted. As soon as the tempera‐

ture rises above -10 °C, the micro-or‐

ganisms become active in the food

again so that it cannot be kept as long.

For this reason, partially defrosted or

fully defrosted food must not be re-fro‐

zen. Food may be re-frozen once it has

been cooked, as the high temperatures

achieved when cooking destroy most

micro-organisms.

Содержание KFN 37692 iDE





















































































































Результаты поиска

Содержание KFN 37692 iDE

Отзывы:

Бренды по названию

Популярные бренды

Miele KFN 37692 iDE, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 37692 iDE

Отзывы:

Бренды по названию

Популярные бренды