Installation
*INSTALLATION*
91
Remove cover
and refit on the
opposite side.
Secure hinge plate
on the opposite
side, starting with screw
in the
middle at the bottom.
Then screw in the other two
screws
.
Insert hinge pin
complete with
washer and adjusting foot.
Important. The lug on the hinge pin
must be pointing backwards again.
Changing the middle hinge plate over
Pull off cover
.
Unscrew hinge plate
with the
protective film underneath.
Turn hinge plate
through 180° and
screw it with the protective film into
position on the opposite side.
The protective film protects the
appliance housing from damage.
Turn grey plastic cover
through
180° and refit it in hinge plate
.
Tip:
Plastic cover
fits over the
protruding bearing bush so that this is
covered from underneath and from the
side.
Turn cover
through 180° and refit it
on the opposite side.
Содержание KFN 29243 D ed/cs
Страница 101: ......
Страница 102: ......
Страница 104: ...M Nr 10 360 600 04 en GB KFN 29233 D ws KFN 29233 D edt cs KFN 29243 D ed cs ...