Miele KFN 29243 D ed/cs, Инструкции по эксплуатации и монтажу

Страница: 52 / 104

Adjusting the interior fittings (refrigerator section)
52
Adjusting the door/bottle shelf
Only move door/bottle shelves when
they are empty.

Push the door/bottle shelf upwards,
then remove it by pulling it forwards.

Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.
Moving the shelves
Stoppers prevent the shelves from
being dislodged by mistake.
 The shelves can be adjusted
according to the height of the
refrigerated goods:
1. Lift the shelf up slightly at the front.
2. Pull it forwards a little and lift it until
the notch at the side is in line with
the shelf support. It can then be
raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upwards to
prevent food from touching the back
of the appliance and freezing to it.
Adjusting the bottle rack
The bottle rack can be placed at
different positions in the appliance.

Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to
prevent bottles from touching the back
of the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.