Miele KFN 14927 SD cs Скачать руководство пользователя

Страница: 37 / 76

PerfectFresh zone
compartments

The compartments in the PerfectFresh
zone are on telescopic rails, and can
be removed for filling, emptying or
cleaning purposes.

Pull out the compartment as far as it
will go, and then lift it up and out.

Push the runners back in again to
avoid injury or damage.

Carefully pull out the lid between the
compartments slightly, and lift it
down and out.

To replace it, insert the compartment
lid from beneath into the holders, and
push it back into place.

To replace the compartment,

place it back on the fully extended
runners

. The front of the runners

must be right up against the front of
the compartment

Then push the compartment back in

Adjusting the condiment
tray/bottle shelf

Lift the tray/shelf up and out of the
stainless steel frame to remove.

Push up the stainless steel frame,
and remove.

Replace the frame at the required
height. Ensure that it is securely
pushed back into position.

Some stainless steel frames are
easier to remove and replace if you
put your hand behind the back bar of
the frame and lift it upwards.

Replace the tray/shelf in the frame.

The tray/shelf can be removed
completely and used as a serving tray
at the table.

Adjusting the interior fittings

Содержание KFN 14927 SD cs













































































Результаты поиска

Содержание KFN 14927 SD cs

Отзывы:

Похожие инструкции для KFN 14927 SD cs

Бренды по названию

Популярные бренды

Miele KFN 14927 SD cs, Инструкция по эксплуатации и установке

Результаты поиска

Содержание KFN 14927 SD cs

Отзывы:

Похожие инструкции для KFN 14927 SD cs

Бренды по названию

Популярные бренды