Miele KFN 14927 SD cs страница 12 Скачать руководство пользователя

Страница: 12 / 76

While the appliance is under guarantee, repairs should only be

undertaken by a service technician authorised by the manufacturer.
Otherwise the guarantee will be invalidated.

The appliance must be isolated from the electricity supply during

installation, maintenance and repair work.

Faulty components must only be replaced by genuine Miele

original spare parts. The manufacturer can only guarantee the safety
of the appliance when Miele replacement parts are used.

This appliance must not be used in a non-stationary location (e.g.

on a ship).

In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the appliance and
its surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the guarantee.

The manufacturer cannot be held liable for damage caused by a

faulty connection to the mains water supply.

Connection to the mains water supply and any repairs to the ice

cube maker must only be carried out by a suitably qualified and
competent person.

The ice cube maker is not suitable for connection to a hot water

supply.

Before plumbing the appliance in, ensure that it is disconnected

from the mains electricity supply.

Warning and Safety instructions

Содержание KFN 14927 SD cs













































































Результаты поиска

Содержание KFN 14927 SD cs

Отзывы:

Похожие инструкции для KFN 14927 SD cs

Бренды по названию

Популярные бренды

Miele KFN 14927 SD cs, Инструкция по эксплуатации и установке

Результаты поиска

Содержание KFN 14927 SD cs

Отзывы:

Похожие инструкции для KFN 14927 SD cs

Бренды по названию

Популярные бренды