Miele KFN 14927 SD cs Скачать руководство пользователя

Страница: 20 / 76

To switch the refrigerator
section/PerfectFresh zone off
separately

The refrigerator section/PerfectFresh
zone can be switched off without
having to switch off the freezer section.
This is useful e.g. whilst on holiday.

Switch the appliance on and select
the refrigerator section.

The "Refrigerator" symbol will light up
yellow.

Touch the On/Off sensor until the
"Refrigerator" symbol goes out.

The interior light will not come on when
you open the door and the refrigerator
section is switched off.

The freezer section remains switched
on and the "Freezer" symbol is lit up.

To switch the refrigerator
section/PerfectFresh zone back on
again

Select the refrigerator section. The
"Refrigerator" symbol lights up yellow,

then touch the On/Off sensor until the
temperature display lights up, or

Switch the appliance off and then
back on again.

The appliance will start to cool, and the
interior lighting will come on when the
refrigerator section door is opened.

Settings mode

Certain settings on the appliance can
only be selected in settings mode.

How to select settings mode and how
to change the settings is described in
the relevant section of these
instructions.

Overview of functions that can be
selected in settings mode:

To enter or leave settings mode

To switch the sensor tone on/off
(see "Switching on and off")

To confirm that the active
charcoal filters have been
changed (see "Active charcoal
filters")

To switch the safety lock on/off
(see "Switching on and off")

To change the brightness of the
temperature display
(see "The correct temperature")

To adjust the temperature in the
PerfectFresh zone
(see "The correct temperature")

Switching on and off

Содержание KFN 14927 SD cs













































































Результаты поиска

Содержание KFN 14927 SD cs

Отзывы:

Похожие инструкции для KFN 14927 SD cs

Бренды по названию

Популярные бренды

Miele KFN 14927 SD cs, Инструкция по эксплуатации и установке

Результаты поиска

Содержание KFN 14927 SD cs

Отзывы:

Похожие инструкции для KFN 14927 SD cs

Бренды по названию

Популярные бренды