Miele KFN 14842 SD ed/cs, Инструкции по эксплуатации и монтажу

Страница: 15 / 68

The appliance will start to cool, and the
interior lighting will come on when the
fridge door is opened.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is at
least -18° C.
To switch between the refrigeration and
freezer sections, touch the relevant
sensor.
If you want to select the freezer section
(to check the temperature, for
example),
^
touch the sensor for changing
between the fridge and freezer
sections until the "Freezer" symbol
lights up.
Depending on which section you have
selected, you can
– select the DynamicCooling function,
– select either SuperCool or
SuperFreeze, or
– adjust the temperature.
Please refer to the relevant section for
more information.
Cool pack
Place the cool pack in the top freezer
drawer. The cool pack will be at its
most effective after it has been in the
freezer for approx. 24 hours.
Switching off
^
Touch the On/Off sensor until all of
the indicators go out. (If this does not
happen, the lock must be switched
on!)
The refrigeration and freezer sections
switch off one after the other.
The interior lighting goes out and
refrigeration is switched off.
Switching refrigeration and freezer
sections on and off separately
The refrigeration and freezer sections
can also be switched on and off
separately so that you can use just one
section if you like.
This is useful whilst on holiday, for
example, when only the freezer needs
to be switched on:
^
Select the section you wish to switch
off.
Switching on and off
15