^
Remove cover
d
.
The SoftClose mechanism is now no
longer fixed to the appliance.
^
Remove panel
a
.
^
Slide SoftClose mechanism bracket
f
as far as it will go towards the
handle side of the door.
^
Undo screw
g
on the SoftClose
mechanism and on the spacer.
^
Lever out the housing of the
SoftClose mechanism in the middle
with a flat-bladed screwdriver.
^
Then lever out the housing of the
SoftClose mechanism from its
position at the side of the appliance.
^
Then place it to one side.
^
Slide out the spacer from the hinge
side.
^
Then place it to one side.
Removing the upper door
^
Gently loosen cover
h
by carefully
inserting a flat-bladed screwdriver
into the gap.
^
Remove cover
h
together with
retaining plate
i
.
^
Then separate retaining plate
i
from
cover
h
by pushing it slightly to the
left. Then pull the cover forwards and
off.
^
Rotate retaining plate
i
by 180°.
^
Then fit cover
h
from the front over
retaining plate
i
and slide it over to
the right. The writing must be visible.
^
Unscrew bearing
j
, turn through
180° and fit to the opposite side. If
necessary, drill pilot holes for the
screws.
^
Remove cover
k
by sliding it
forwards from the back and then
lifting it off.
^
Remove cover
l
by pulling it
upwards.
Changing the door hinging
56
Содержание KFN 14842 SD ed/cs
Страница 66: ...66 ...
Страница 67: ...67 ...
Страница 68: ...Alteration rights reserved 4910 KFN 14943 SD KFN 14943 SD ed cs KFN 14842 SD ed cs M Nr 09 029 600 00 ...