^
Secure the appliance in the housing
unit using the short 4 x 14 mm
screws
b
through the bottom hinge
plates and then tighten them up.
^
Screw fixing bracket
e
back on (if
this has not already been done).
^
Secure the appliance to the housing
unit wall on the door opening side
using two 4 x 14 mm screws through
the upper fixing bracket
a
and one
4 x 14 mm screw
f
through fixing
bracket
e
and then tighten them.
^
Close the fixing bracket
a
back up
again and fit cover
g
.
^
Align cover strip
h
by sliding it
parallel to the housing unit ceiling.
The cover strip must not protude.
^
Secure the appliance to the top of the
housing unit using the short 4 x
14 mm screws
i
through the cover
strip before tightening them.
Fitting a furniture door
^
Fit the door coupling parts
a
to the
appliance door at handle height
using the 3.9 x 9.5 mm
b
self
tapping screws (on a larger door an
extra door coupling should be fitted).
Use the pre-drilled holes.
^
Open the doors right out and push
the coupling guides
c
in to the door
coupling parts.
Building in the appliance
41
Содержание KF 882 iD-1
Страница 43: ...43 ...