^
Remove hinge pin
d
, tilt the lower
appliance door and take it off.
^
Use a screwdriver to remove plug
j
.
^
Replace the lower hinge pin
i
together with its washer
h
on the
other side.
^
Take cover cap
k
off fixing bracket
l
and unscrew it. It is used later on
the other side for securing the
appliance into the housing niche.
^
Unscrew hinge plate
e
, rotate it
180°, and fit it onto the opposite side:
Screw the outside screw
f
in only
half way on the opposite side. Then
put the hinge plate on it and push it
inwards. Then secure using the inner
screw.
^
Place the lower appliance door on
the bottom hinge pin
i
, and close
the appliance door.
^
Then place the top hinge pin
d
in
position.
^
Completely unscrew outer screw
m
at the top, and half screw it in to the
opposite side.
^
Fit the upper appliance door onto
hinge pin
a
, then hang the hinge
plate on the previously fitted screw
b
, push it inwards, and secure using
the second screw
c
.
^
Make sure that both appliance doors
are correctly aligned and adjust if
necessary. Then tighten all screws in
the hinge plates.
^
Fit all covers and plugs.
Changing the door hinging
38
Содержание KF 882 iD-1
Страница 43: ...43 ...