Before using for the first time
The stainless steel surfaces and the
stainless steel trim on the shelves have
a protective foil to prevent scratching
during transportation.
^
Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^
Wipe stainless steel surfaces over
with a suitable proprietary
conditioning agent for stainless steel,
such as Neoblank (available from the
Miele Spare Parts Department).
Follow the manufacturer’s instructions
on the label, and apply sparingly with
an even pressure following the
direction of the grain.
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
The refrigerator and freezer sections
are switched on together with the
master dial on the right hand side of the
control panel.
^
Using a coin turn the On/Off master
dial in a clockwise direction away
from the "0" position.
Forcing it beyond its range will
damage it. Turn it only as far as it will
go, then turn it back again.
The temperature display for the
refrigerator section will light up and the
interior lighting will come on when door
is opened.
The temperature display for the freezer
section will light up.
The alarm indicator light will also light
up. It will go out when the temperature
in the freezer is cold enough.
The appliance will start cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Cool packs
Place the cool packs in the top drawer.
The cool packs will be at their most
effective after they have been in the
freezer for approx. 24 hours.
Switching off
^
Using a coin turn the On/Off master
dial in an anti-clockwise direction
back to the "0" position.
The temperature displays will go out out
and the cooling process is switched off.
Switching on and off
12