Frequently Asked Questions
122
Message
Possible cause and solution
“
F Please contact Miele
Technical Service.
” ap-
pears in the display and
an alarm sounds.
There is a fault.
Make a note of the fault message if necessary.
Contact Miele Service.
To turn the alarm off, touch the
symbol.
The error message does not disappear from the dis-
play until the error has been rectified.
The voltage level is too high/low.
Observe the connection data under “Electrical
connections”.
Contact Miele Service if necessary.
To turn the alarm off, touch the
symbol.
The error message does not disappear from the dis-
play until the error has been rectified.
is shown in the dis-
play. The machine does
not get cold, but the
machine controls are
working.
Demo Mode
is switched on. Demo mode allows the
appliance to be presented in the showroom without
the cooling system being turned on. Do not activate
this setting for domestic use.
Switch off Demo mode
(see “Selecting additional
settings”, section “Switching off
Demo Mode
”).
Содержание KF 2982 SF
Страница 23: ...Installation INSTALLATION 23 A B C D A B C D 84 85 3 16 2134 2164 mm 36 915 mm 24 610 mm 3 4 19 mm ...
Страница 24: ...Installation INSTALLATION 24 1 3 16 30 mm 7 8 22 mm 9 5 8 244 mm 4 102 mm 4 102 mm 3 3 8 85 mm Side view ...
Страница 129: ...Declaration of conformity 129 Frequency range 2 412 GHz 2 462 GHz Maximum trans mitting power 100 mW ...
Страница 132: ...M Nr 11 508 700 02 en US CA KF 2982 SF ...