![background image](http://html.mh-extra.com/html/miele/kf-2981-vi/kf-2981-vi_operating-and-installation-instructions_236514088.webp)
The correct temperature
88
Setting the temperature
Touch the
symbol for setting the
temperature.
The previously set temperatures of the
Fridge and Freezer Zones are displayed.
Use the
and
arrow buttons to
select the temperature zone for which
you want to adjust the temperature
and touch
OK
to confirm your selec-
tion.
Set the temperature you want with
the
and
sensor controls. Keep-
ing your finger on the sensor control
changes the temperature continu-
ously.
Confirm the temperature setting
with
OK
or wait approx. 8 seconds af-
ter the last touch of the sensor. This
temperature will be automatically
adopted.
Tip:
The newly set temperature can also
be confirmed and adopted by closing
the appliance door.
The temperature display always shows
the
required
temperature.
If you have adjusted the temperature,
wait for approximately 6 hours if the
appliance is not very full and for ap-
proximately 24 hours if the appliance
is full
before checking the temperature
display. It will take this long for an accu-
rate reading to be given.
If, after this time, the temperature is
still too high or too low, adjust it
again.
Temperature range
The temperature can be adjusted:
- From 36°F (2°C) to 46°F (8°C) in the
Fridge Zone
- From 7°F (-14°C) to -11°F (-24°C) in
the Freezer Zone
The temperature in the dry compart-
ment of the MasterFresh zone is regu-
lated automatically and is maintained
just above 0°C (32°F) at a Fridge Zone
temperature of 4°C (37°F).
Please note that if the temperature in
the Fridge Zone is any warmer, the
temperature in the dry compartment of
the MasterFresh zone will rise as well.
The ambient temperature in the room
and the installation location can af-
fect the time it takes for the appli-
ance to reach the lowest tempera-
ture.
If the ambient temperature is too
high, the appliance may not reach
the lowest temperature.
Содержание KF 2981 Vi
Страница 132: ...Declaration of conformity 132 Frequency band 2 412 GHz 2 462 GHz Maximum trans mitting power 100 mW ...
Страница 134: ......
Страница 136: ...M Nr 10 785 190 04 en US CA KF 2981 Vi ...