Miele KF 2801 SF, Инструкции по эксплуатации и монтажу

Страница: 84 / 124

Adjusting the interior fittings
84
Removing the freezer baskets
The freezer baskets can also be re-
moved if necessary (e.g., for cleaning).
 Open the lower appliance door as
wide as possible.
 Pull the freezer basket out as far as it
will go.

Raise the snap fastening

on both
sides, unclip, and carefully lift the
basket out.

To replace it, pull the telescopic run-
ners

out as far as they will go.
 Place the freezer basket back in
again.

Slide the basket all the way back in
again until it engages in the snap fas-
tening.
Removing the dividing panel (de-
pending on the model)
The dividing panel in the freezer basket
can be removed for cleaning:
The dividing panel is secured to the
freezer basket with brackets.
 Pull the freezer basket out as far as it
will go.
 To release the brackets, use a suit-
able object to turn the slots in the
pegs to a horizontal position (1.).
 Remove the pegs from the brack-
ets (2.).

Pull the dividing panel upwards to re-
move it.

To reinsert the partition wall, place
the brackets in an upright position,
and position the dividing panel into
the brackets so that you hear it click
into place.

Insert the pegs into the brackets, and
use a suitable object to turn the slots
in the pegs into a vertical position.

Push the freezer basket all the way
back in.