Miele KF 1801 Vi, Инструкции по эксплуатации и монтажу

Страница: 90 / 96

Repeat the steps from "Preparing
the furniture fronts" to fit the furniture
front to the freezer drawer.
The positioning of the freezer drawer
front must be aligned to that of the
refrigerator door front.
When fitting the drawer front, bear in
mind the gap between the drawer and
door fronts:
^
Measure gap Y between the
adjusting bar on the freezer drawer
and the refrigerator door.
^
A gap of 3 mm needs to be
maintained between the drawer and
refrigerator door.
Fitting the fixing brackets
The fixing brackets are used to secure
the furniture fronts at the bottom.
^
Open the freezer drawer as far as it
will go.
^
Loosen the screws (1).
^
Position the fixing bracket on the
appliance door (2) and pre-drill a
hole in the furniture front.
^
Screw the fixing bracket securely to
the furniture front (3).
^
Now tighten the screw (4).
^
Fit the cover to the fixing bracket (5).
The number of fixing brackets required
will depend on the material and width of
the furniture front.
Installation
90