Miele KF 1801 Vi, Инструкции по эксплуатации и монтажу

Страница: 24 / 96

Setting the temperature in the
refrigerator/freezer zones
The temperatures in the refrigerator and
freezer zones are set independently of
one another.
^
Touch the access sensor so that it is
highlighted in yellow.
^
Touch the sensor for the refrigerator
or freezer zone so that it is
highlighted in yellow.
^
The temperature inside the appliance
can be selected by touching the
arrow sensors on either side of the
temperature display.
By touching the
X
sensor: the temperature will get
colder
Y
sensor: the temperature will get
warmer.
The temperature range being set will
flash in the display as you do this.
– Touching the sensor once:
adjusts the temperature shown in
1 °C steps.
– Keeping your finger on the sensor:
changes the temperature
continuously.
If the highest or lowest temperature that
it is possible to set is reached, the
X
or
Y
sensor will disappear from the
display.
The temperature display on the
control panel always shows the
required temperature.
When you have adjusted the
temperature,
wait for approx. 6 hours
if the appliance is not very full and
for approx. 24 hours if the appliance
is full
before checking the temperature,
as it will take this long for the appliance
to reach the temperature. If, after this
time, the temperature is still too high or
too low, you will need to adjust it again.
Temperature range
The temperature can be adjusted:
– In the refrigerator zone from 2 °C to
8 °C
– In the freezer zone from -14 °C to
-24 °C.
The ambient temperature in the
room and the installation location
can affect the time it takes for the
appliance to reach the lowest
temperature. If the ambient
temperature is too high, the
appliance may not reach the lowest
temperature.
The correct temperature
24