Setting the temperature in the
refrigerator
Use the two buttons underneath the
temperature display to set the
temperature for the refrigerator.
If the refrigerator zone temperature
is set to
4 °C
the freezer
compartment will drop to approx.
-18 °C
.
Press the
+ button: to raise the temperature (it
gets warmer)
– button: to reduce the temperature (it
gets cooler).
The temperature being set will flash in
the display.
When pressing the buttons, the
following information shows in the
display:
– When first pressed, the
last
temperature selected
flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button, the
current average
temperature of the refrigerator is
automatically shown.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full
and
for
approx. 24 hours if the appliance is
full
, before checking the temperature
display, as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still
too high or too low, you will need to
adjust it again.
Temperature range
The temperature can be adjusted from:
4 °C to 9 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
The correct temperature
18
Содержание K 9758 iDF
Страница 45: ...Niche height mm A K 9758 iDF 1772 1788 Building in dimensions 45 ...
Страница 58: ...58 ...
Страница 59: ...59 ...
Страница 60: ...Alteration rights reserved 4008 K 9758 iDF M Nr 07 471 130 00 ...