Before installation
^
Before installation remove the cover
strip, sealing strip and other
accessories from the appliance and
from the external rear wall of the
appliance.
^
On no account should the spacers
be removed from the back of the
appliance. These ensure the gap
required between the back of the
appliance and the wall is maintained.
^
Remove any cable clips from the rear
of the appliance.
^
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Does your old appliance have
a different hinging
mechanism?
If your old appliance had a different
type of hinging, the furniture door can
still be used. Remove the old hinges
from the housing unit. They are no
longer required because the furniture
door is now fitted to the appliance door.
All the necessary parts are supplied or
can be ordered from the Miele Spare
Parts Department.
Stainless steel front
(depending on model)
The old door can be replaced by a
stainless steel front if required.
This is available from your dealer or
the Miele Spare Parts Department.
Installation
44
Содержание K 9758 iDF
Страница 45: ...Niche height mm A K 9758 iDF 1772 1788 Building in dimensions 45 ...
Страница 58: ...58 ...
Страница 59: ...59 ...
Страница 60: ...Alteration rights reserved 4008 K 9758 iDF M Nr 07 471 130 00 ...