Installing the appliance
^
Push the appliance into its housing
unit.
When doing this, make sure that the
mains cable does not get trapped.
^
Depending on the thickness of the
appliance housing walls, push the
appliance into the niche until
– the spacer piece touches the
housing unit wall
a
(16 mm thick
walls), – or the front edges of the
hinges are flush with the side walls of
the housing unit
b
(19 mm thick
walls).
The cover strip must
not
protrude in
front of the edge of the housing unit.
It must disappear completely into
the niche.
^
Push the hinged side of the
appliance to the furniture wall.
^
Align the appliance by altering the
adjustable feet using the spanner
supplied
f
.
^
Secure plastic bracket
c
to the side
opposite the hinges using the M5 x
22 countersunk screws
d
.
^
Push the appliance in until the plastic
bracket is flush with the front edge of
the housing unit floor
e
.
^
To fix the appliance to the housing
unit at the top and bottom screw the
long 4 x 19 mm chip board screws
a
loosely into the hinge.
Installing the appliance
36
Содержание K 841i
Страница 40: ... Place all covers in position Installing the appliance 40 ...
Страница 41: ...41 ...
Страница 42: ...42 ...
Страница 43: ...43 ...