Miele K 5122 Ui страница 33 Скачать руководство пользователя | Manualshive

Страница: 33 / 44

background image

Installation

33



Danger of injury and damage to

the appliance.
This appliance must be built in, oth-
erwise it could tip up.
Keep the appliance door(s) shut until
the appliance has been built in and
secured in its housing in accordance
with these operating and installation
instructions.



Fire risk and danger of damage!

This appliance must not be installed
underneath a hob.

Location

This appliance should be installed in a
dry, well-ventilated room.

When deciding where to install your re-
frigeration appliance please bear in
mind that it will use more energy if in-
stalled near to a heater, a cooker or
other appliance that gives off heat. Dir-
ect sunlight should also be avoided.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption is.

When installing the appliance, please
note:

– The socket must be easily accessible

in an emergency, not concealed be-
hind the appliance.

– The plug and cable must not touch

the rear of the appliance as they
could be damaged by vibrations from
the appliance.

– Do not plug in other appliances be-

hind this appliance.



Risk of damage!

In environments with high humidity

condensation can build up on the ex-
ternal appliance panels. Condensate
can cause corrosion on external ap-
pliance panels.
For prevention, it is advisable to in-
stall the appliance where there is suf-
ficient ventilation in a dry and/or air
conditioned room.
After installation please make sure
that the appliance door closes prop-
erly, the specified ventilation gaps
are adhered to and that the appli-
ance is installed in accordance with
these installation instructions.

Climate range

The appliance is designed for use within
a certain climate range (ambient tem-
peratures) and should not be used out-
side this range. The climate range of the
appliance is stated on the data plate in-
side the appliance.

Climate range

Ambient room

temperature

SN

+10 to +32 °C

N

+16 to +32 °C

ST

+16 to +38 °C

T

+16 to +43 °C

Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal tem-
perature in the appliance to rise with the
risk of food deteriorating and going off.

«
...
31
32
33
34
35
...
»

Содержание K 5122 Ui













































Отзывы:

Нет отзывов

Похожие инструкции для K 5122 Ui

Бренд: Samsung Страницы: 2

Бренд: Daikin Страницы: 72

Бренд: Magic Chef Страницы: 6

Бренд: Saba Страницы: 32

Бренд: Igloo Страницы: 27

Бренд: Howard McCray Страницы: 8

Бренд: NEFF Страницы: 30

CoolMatic HDC-270

Бренд: Waeco Страницы: 176

Бренд: ZANKER Страницы: 36

Бренд: U-Line Страницы: 18

Бренд: Jocel Страницы: 39

Бренд: GE Страницы: 4

Бренд: GE Страницы: 2

Бренд: GE Страницы: 2

Бренд: GE Страницы: 128

Бренд: GE Страницы: 138

Бренд: GE Страницы: 2

Бренд: GE Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды