Miele K 5122 Ui страница 7 Скачать руководство пользователя

Страница: 7 / 44

Warning and Safety instructions



Reliable and safe operation of this appliance can only be assured

if it has been connected to the mains electricity supply.



If the electrical connection cable is faulty it must only be replaced

by a Miele authorised service technician to protect the user from
danger.



Do not connect the appliance to the mains electrical supply by a

multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.



If moisture gets into electrical components or into the mains con-

nection cable, it could cause a short circuit. Therefore, do not oper-
ate this refrigeration appliance in areas which are exposed to mois-
ture (e.g in a garage or utility room).



This appliance must not be used in a non-stationary location (e.g.

on a ship).



Do not use a damaged appliance. It could be dangerous. Check

the appliance for visible signs of damage.



For safety reasons, this appliance may only be used after it has

been built in.



The appliance must be isolated from the electricity supply during

installation, maintenance and repair work.



Unauthorised installation, maintenance and repairs can cause

considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.



While the appliance is under warranty, repairs should only be un-

dertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.



Miele can only guarantee the safety of the appliance when genu-

ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.

Содержание K 5122 Ui













































Результаты поиска

Содержание K 5122 Ui

Отзывы:

Похожие инструкции для K 5122 Ui

Бренды по названию

Популярные бренды

Miele K 5122 Ui, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 5122 Ui

Отзывы:

Похожие инструкции для K 5122 Ui

Бренды по названию

Популярные бренды