Installing the appliance
79
Carefully remove the protective foil
from sealing strip
.
Fix sealing strip
flush with the front
of the appliance on the door opening
side.
1. Position the sealing strip flush with
the lower edge of the top fixing.
2. Stick it down along its entire length.
Installing the appliance
If the appliance is pushed too far into
the niche, the doors may not close
properly once the furniture door has
been fitted. This can cause ice to
build up, condensate to accumulate
and lead to faults in the appliance.
These can all lead to increased en-
ergy consumption.
Push the appliance into the building-
in niche making sure a gap of
42 mm
is maintained all round between the
appliance carcase and the front of
the housing unit side walls.
Push the appliance into the niche un-
til all fixing brackets at the top and
bottom are in line with the front edge
of the housing unit side wall.
This will create a gap all round of
42
mm
to the front edges of the housing
unit side walls.
–
With 16 mm thick walls:
The spacers should touch the front
edge of the housing unit side walls at
the top and bottom.
–
With 19 mm thick walls:
The front edges of the top and bot-
tom hinges should be flush with the
front edge of the housing side wall.
Содержание K 34673 iD
Страница 88: ......
Страница 89: ......
Страница 90: ......
Страница 92: ...M Nr 10 949 920 00 en GB K 34673 iD K 35672 iD K35673 iD K 37672 iD K 37673 iD ...