Miele K 34673 iD Скачать руководство пользователя страница 60

Страница: 60 / 92

Information for dealers

Demo mode



The appliance can be demonstrated in
the showroom or at exhibitions in
“Demo mode”. In this mode the control
panel and interior lighting are active but
the compressor remains switched off,
so that the appliance does not cool
down.

Switching on demo mode



Switch the appliance off using the
On/Off sensor.
If this does not work, the safety lock
is still activated.

The temperature display will go out and
the mains connection symbol



will

appear.



Place your finger on the



sensor,

and leave it there.



At the same time, briefly touch the
On/Off sensor (without letting go of
the



sensor).



Leave your finger on the



sensor

until the



symbol appears in the dis-

play.



Then release the



sensor.

Demo mode is switched on and the



symbol appears in the display.

Содержание K 34673 iD





























































































Результаты поиска

Содержание K 34673 iD

Отзывы:

Похожие инструкции для K 34673 iD

Бренды по названию

Популярные бренды

Miele K 34673 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 34673 iD

Отзывы:

Похожие инструкции для K 34673 iD

Бренды по названию

Популярные бренды