Miele K 2601 Vi, Инструкции по эксплуатации и монтажу

Страница: 87 / 116

The correct temperature
87
Setting the temperature

Touch the

sensor control to set the
temperature.
The previously set temperature will ap-
pear.
 Use the  and  sensor controls to
set the temperature. Keeping your fin-
gers on the sensor controls changes
the temperature continuously.

Confirm the temperature setting
with
OK or wait approx. 8 seconds
after the last touch of the sensor con-
trol. The temperature will then be
automatically adopted.
Tip: The newly set temperature can also
be confirmed and adopted by closing
the appliance door.
The temperature display always shows
the
required temperature.
If you have adjusted the temperature,
wait for approx. 6 hours if the refri-
geration appliance is not very full and
for approx. 24 hours if the refrigera-
tion appliance is full
before checking
the temperature display. It will take this
long for the appliance to give an accur-
ate reading.
 If, after this time, the temperature is
still too high or too low, you will need
to adjust it again.
Adjusting the temperature in the dry
compartment of the MasterFresh
zone
The temperature in the dry compart-
ment of the MasterFresh zone is main-
tained at approx. 0 °C.
However, if you would like it to be
warmer or colder, you can adjust the
temperature slightly (see “Selecting ad-
ditional settings – Adjusting the temper-
ature in the MasterFresh zone (dry com-
partment)

”).
Tip: You can select a lower setting for
storing, for example, particularly delic-
ate fish. A slightly higher temperature is
preferable for storing ready-to-eat food,
for example.
Temperature range
The temperature in the refrigerator sec-
tion can be adjusted from 2 °C to 8 °C.
The temperature in the dry compart-
ment of the MasterFresh zone can be
adjusted from approx. -1 °C to 3 °C.