Miele K 14827 SD Скачать руководство пользователя страница 52

Страница: 52 / 60

Unscrew part

from hinge plate

rotate it by 180° and refit into the hole
on the opposite side of the hinge
plate.

Refit cover cap

in the other hole.

Unscrew threaded pin

fully using

the allen key supplied.

Fit threaded pin

into the hinge

plate on the opposite side, until it is
flush with the hinge plate.

The end must protrude sufficiently
through the hinge pin hole such that
the guide on the hinge pin will fit over
it later on (see following illustration).

Remove cover

and fit it into the

holes on the opposite side.

Screw hinge plate

into position on

the opposite side using the two

outer

long slots only. To make it possible to
align the door later, do not replace
the

centre

screw at this stage.

Important. Screw the adjustable foot

into hinge pin

as far as it will go.

Refit the hinge pin

together with

disc

and adjustable foot

such

that the guide on the end of the pin
fits over the threaded pin. Then
tighten it.

Then tighten threaded pin

Changing the door hinging

Содержание K 14827 SD





























































Результаты поиска

Содержание K 14827 SD

Отзывы:

Miele K 14827 SD, Руководство по эксплуатации и установке, Страница: 52 / 60

Результаты поиска

Содержание K 14827 SD

Отзывы: