PerfectFresh zone
compartments
The compartments in the PerfectFresh
zone are on telescopic rails, and can
be removed for filling, emptying or
cleaning purposes.
^
Pull out the compartment as far as it
will go, and then lift it up and out.
Push the runners back in again to
avoid injury or damage.
^
Carefully pull out the lid between the
compartments slightly, and lift it
down and out.
^
To replace it, insert the compartment
lid from beneath into the holders, and
push it back into place.
To replace the compartment,
^
place it back on the fully extended
runners
a
. The front of the runners
must be right up against the front of
the compartment
b
.
^
Then push the compartment back in
c
.
Adjusting the condiment
tray/bottle shelf
^
Lift the tray/shelf up and out of the
stainless steel frame to remove.
^
Push up the stainless steel frame,
and remove.
^
Replace the frame at the required
height. Ensure that it is securely
pushed back into position.
^
Some stainless steel frames are
easier to remove and replace if you
put your hand behind the back bar of
the frame and lift it upwards.
^
Replace the tray/shelf in the frame.
The tray/shelf can be removed
completely and used as a serving tray
at the table.
Adjusting the interior fittings
29
Содержание K 14827 SD
Страница 46: ...Appliance dimensions A B C K 14827 SD K 14827 SD ed cs 1850 mm 600 mm 630 mm Installation 46 ...
Страница 58: ...58 ...
Страница 59: ...59 ...
Страница 60: ...Alteration rights reserved 4711 K 14827 SD K 14827 SD ed cs M Nr 07 937 090 02 ...