Miele K 14827 SD Скачать руководство пользователя страница 51

Страница: 51 / 60

Changing over the hinge brackets

Important! The height of the door
on stainless steel appliances can
be adjusted.
Please read the relevant
instructions.
The instructions are the same for
all appliances from "To refit the
door".

A. White appliances
(door not height adjustable)

Pull hinge pin

together with disc

and adjustable foot

upwards and

off.

Remove cover cap

Undo screws

and take hinge plate

off.

Unscrew part

from hinge plate

rotate it by 180° and refit into the hole
on the opposite side of the hinge
plate.

Refit cover cap

in the other hole.

Remove cover

and fit it into the

holes on the opposite side.

Screw hinge plate

into position on

the opposite side using the two

outer

long slots only. To make it possible to
align the door later, do not replace
the

centre

screw at this stage.

Important. Screw the adjustable foot

into hinge pin

as far as it will go.

Refit hinge pin

together with disc

and adjustable foot

. Important.

The notch at the bottom of the hinge
pin should face towards the back.

B. Stainless steel appliances
(height adjustable door)

Unscrew threaded pin

by one turn

using the allen key supplied.

Pull hinge pin

together with disc

and adjustable foot

upwards and

off.

Remove cover cap

Undo screws

and take hinge plate

off.

Changing the door hinging

Содержание K 14827 SD





























































Результаты поиска

Содержание K 14827 SD

Отзывы:

Miele K 14827 SD, Руководство по эксплуатации и установке, Страница: 51 / 60

Результаты поиска

Содержание K 14827 SD

Отзывы: