Warning and safety instructions
10
Risk of injury due to electric shock. Any contact with live
connections or tampering with the electrical or mechanical
components of the oven will endanger your safety and may lead to
appliance malfunctions.
Do not open the oven housing under any circumstances.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
Miele can only guarantee the safety of the appliance when original
Miele spare parts are used. Faulty components must only be
replaced by original spare parts.
If the oven is delivered without a mains connection cable, a
special cable must be installed by a suitably qualified and competent
person (see “Installation - Electrical connection”).
If the mains connection cable is damaged, it must be replaced with a
special connection cable by a suitably qualified and competent person
(see “Installation - Electrical connection”).
During installation, maintenance and repair work, the oven must
be completely disconnected from the mains electricity supply. To
ensure this:
– Switch off the mains circuit breaker, or
– switch off at the wall socket and withdraw the plug. To do this,
pull the plug and not the mains connection cable.
The oven requires a sufficient supply of cool air for efficient operation.
Make sure that the supply of cool air is not hindered in any way (e.g. by
heat insulation strips fitted in the housing unit). Furthermore, the required
supply of cool air must not be excessively heated by other heat sources
(e.g. solid fuel stoves).
If the oven is built in behind a furniture front (e.g. a door), do not
close the furniture door while the oven is in use. Heat and moisture
can build up behind the closed furniture door. This can result in
damage to the oven, housing unit and floor. Leave the furniture door
open until the oven has cooled down completely.
Содержание H 7840 BM
Страница 115: ...Installation I N S T A L L A T I O N 115 Side view A 47 mm ...
Страница 130: ......
Страница 132: ...M Nr 11 196 450 02 en AU NZ H 7840 BM ...