What if "F" and a number appear in the oven display?
"
F3
": The roast probe is
faulty.
Remove the probe from its socket and the code will
disappear.
"
F6
": The oven has automati-
cally shut off.
This is a safety feature to protect the oven if it has
been operated for too long. The oven can be reset
by turning the program selector to "0" and then
restarting the program.
"
F7
" The cooling fan has
stopped turning.
If "
F7
", "
F8
", "
F9
" or any other unexplained fault
codes are displayed, please call Technical Service.
"
F8
" The convection fan has
stopped.
"
F9
" The maximum tempera-
ture of the oven has been
exceeded, and the oven has
shut off. As soon as the tem-
perature has fallen to an ac-
ceptable level, the fault
code will disappear. The
oven will turn itself on again.
"
F13
": The door lock for the
Self Clean program does not
work.
Turn the program selector to the "0" position and
then to "Light".
After 60 seconds the error message will go out and
"
PYRO
" and the symbol "
p
" will light up in the display.
After 30 seconds the symbol "
p
" will flash.
Turn the program selector to "0". The oven is ready
to operate again.
If you still can not operate the oven or if this error
message occurs again contact Technical Service.
"
F14
": The door lock for the
Self Clean program does not
open.
If an attempt was made to open the door before the
"
p
" symbol started flashing to indicate the end of
the cleaning process push the door shut and wait
until the "
p
" symbol starts flashing in the display.
This releases the lock and the oven door can now
be opened.
If "F14" still appears in the display there could be a
technical fault requiring a service call . Contact
Technical Service.
Frequently asked questions
54
Содержание H 387-1 BP KAT
Страница 27: ...Guide to the programs ...
Страница 63: ...63 ...