Miele G 8072, Руководство по эксплуатации

Страница: 18 / 52

Programming the water
softener
On machines with integral water
softeners, programme the water
softener as follows.
^
Press the
[
control to switch the
machine off.
^
Press and hold controls
4
, { and
§ , and whilst doing so press
[
to
switch the machine on.
P 19 will appear in the top display
and the total water hardness level will
appear in the bottom display in °d
(25 in the display equates to 25°d or
4.5 mmol/l).
^
Press § or ° until the required
hardness level shows in the bottom
display.
^
Save the reading by pressing the
4
control.
^
Press control
[
to switch the
machine off.
If the water hardness level changes,
enter the new level following the above
instructions.
If the mains water hardness level is
over 25 °d (4.5 mmol/l), please
contact the Miele Professional
Department about an on-site water
softening system.
Water softener
18