manualshive.com logo in svg

Miele G 7782 CD, Руководство по эксплуатации

Поделиться
Скачать
Miele G 7782 CD Скачать руководство пользователя страница 44

When the REACTIVATION indicator light
on the left hand side of the control
panel comes on during a cycle, the
built-in water softener is depleted and
cannot supply any more soft water.

It should be reactivated with salt as
soon as the wash cycle has finished. If
this cannot be done, and further loads
have been washed, then the reactiva-
tion process should be carried out
twice in succession.

Each reactivation cycle requires:

^

4.4 lbs (2 kg) of water softener salt.
Do not use any other type of salt, it
may damage the water softener. Soft-
ener salt can be ordered from Miele’s
Technical Service Department.

^

The plastic salt container which is
supplied with the washer/disinfector.

Filling the salt container

1.

Unscrew the filter insert from the salt
container and remove.

WARNING: PERSONAL INJURY/
EQUIPMENT DAMAGE HAZARD
Do not fill container with cleaning
detergent! Fill with reactivation salt
only! Detergents can be corrosive,
causing potential personal injury
and damage to the water softener.

2.

Fill the salt container with approx.
4.4 lbs (2 kg) of granular salt and
screw the filter insert back in place.

Reactivating the water softener

40

Содержание G 7782 CD





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды