manualshive.com logo in svg

Miele G 7782 CD, Руководство по эксплуатации

Поделиться
Скачать
Miele G 7782 CD Скачать руководство пользователя страница 34

WARNING - PERSONAL INJURY
HAZARD: Do not allow small chil-
dren or unauthorized personnel ac-
cess to the washer/disinfector or its
controls.

Cycle Operation

1. Turning on

^

Press ON/OFF button.

2. Loading washer/ disinfector

Load accessories and
washer/disinfector as explained in
"Loading the washer/disinfector".

3. Selecting a cycle

After turning on the washer/ disinfector,
the indicator lights next to the available
cycles will light.

^

Press the touch pad for the required
cycle. The wash temperature of the
selected cycle will show in the dis-
play field and phase indicator lights
for selected cycle will light.

^

If drying cycle is desired, press
DRYING touch pad (see "Selecting
an additional cycle’).

NOTE:

Provided the START touch pad

has not yet been pressed, a mistakenly
selected cycle may be changed by
pressing the appropriate touch pad to
select the correct cycle, then pressing
the START touch pad.

4. Running a cycle

^

Press the START touch pad. The dis-
play field will show the total process-
ing time in minutes for the selected
cycle and the washer/disinfector will
begin cycle operation.

NOTE:

Once START is pressed, all

other cycles are blocked and only the
indicator lights for the selected cycle
are lit.

^

During the heating stage in WASH
and FINAL RINSE, the end tempera-
ture will be alternately displayed on
the control panel.

Washer/Disinfector operation

30

Содержание G 7782 CD





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды