Before using for the first time
21
Displaying and setting the water
hardness
Switch the dishwasher off with the
button, if it is switched on.
Press the
/
button in and
whilst
holding it in
switch the dishwasher
on using the
button.
Keep the
/
button pressed in for
at least four seconds until the
/
indicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the
button twice.
The
indicator will flash rapidly twice
at intervals.
The value set for the water hardness is
shown as a figure after
in the display
(see chart).
will start flashing in the display.
This is the factory default setting of
15 °d.
Use the
/
button to select the
value which equates to your water
hardness level.
Each press on the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Содержание G 4202
